Oce WP36/50 Operation Manual - page 52
Chapter 3 Using the Operator Panel
3-31
Select
On
or
Off
using the or key.
Press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready
.
2.2.8 Setting the Print Quality
You can make the following settings to enhance the print
quality: Kyocera Image Refinement (KIR), a software algo-
rithm for increasing printout quality; EcoPrint, a printing
mode that reduces toner consumption during printing; print-
ing resolution; and Adjustment of Print Density.
KIR (Kyocera Image Refinement)
This printer incorporates the KIR (Kyocera Image Refine-
ment) smoothing function. At a resolution of 600 dpi this
function provides high print quality by providing software en-
hanced print resolution.
Figure 3-11
Set the print density to 3 when setting the KIR mode. For de-
tails on print density, see
page 3-32
. You can monitor the KIR
test pattern, the last line on a status page, to make the opti-
mum KIR mode setting.
Press the
MENU
key.
Press the or key repeatedly until
Quality >
appears.
Press the key.
Press the or key repeatedly until
>KIR Mode
appears.
Press the
ENTER
key. A blinking question mark (
?
)
appears.
Select
On
or
Off
using the or key.
Press the
ENTER
key.
Press the
MENU
key. The message display returns to
Ready
.
EcoPrint
The EcoPrint enables you to reduce the amount of toner con-
sumed on the page so as to save your printing costs. You can
set EcoPrint mode
On
, as follows. (The factory default setting
is
Off
.) The EcoPrint mode setting is
On
when the printing
image becomes lighter, yet very readable.
Figure 3-12
The EcoPrint setting has no effect on the print speed.
Press the
MENU
key.
Press the or key repeatedly until
Quality >
appears.
Press the key.
Press the or key repeatedly until
>EcoPrint
Mode
appears.
NOTE
Print Quality >
>KIR Mode
On
6
7
8
With KIR
Off
With KIR
On
(default)
1
2
3
4
>KIR Mode
? On
NOTE
Print Quality >
>EcoPrint Mode
Off
5
6
7
8
EcoPrint setting is
Off
(default)
EcoPrint setting is
On
1
2
3
4