OCEAN PRESENCE OPT-06SD/HD User Manual - page 10
OceanCam User’s Manual
Version: 2.0 7/16/13
Ocean Presence Technologies
Copyright ©2011-2013 All Rights Reserved.
Page 10
4.0 CAMERA OPERATIONS
The camera is a fully featured security
camera. It has numerous features that far
exceed those needed for most underwater
applications.
Features includes a variety of navigation
tools, secure user login, remote operations,
display and panorama tools, image/video
capture, E-mail and FTP image
transmission, two-way audio, motion
detection, executive control camera
management and many more. Features
relevant to the use of the camera
underwater will be discussed in this
manual. Please refer to the Sony User’s
Manual for a more in depth discussion and
for other features.
4.1 S
OFTWARE
I
NSTALLATION
The SNC Toolbox is first downloaded to a
Windows PC using the install disk. The CD
also contains a user manual on the
camera’s operation and other valuable
tools.
Once the software has been downloaded
and installed, open the SNC Toolbox
program. The table that will appear
contains the MAC address, IP address,
model, serial number and version number
of each camera on the network. If the
camera is properly connected, this
information will be displayed.
Each camera will appear on a separate
line. The IP Address of the camera will be
assigned using DHCP. This indicates that
the software has automatically detected
the camera.
An empty table indicates that the camera is
not properly connected or not turned on.
(For further assistance see
Troubleshooting Section 8.1)
At this point, the camera can be accessed
either by selecting the camera in the
toolbox or by entering the IP Address into a
browser window.
F
IRST TIME
A
CTIVE
X
USERS MAY BE
REQUIRED TO APPROVE THE INSTALLATION
OF THE VIEWER
.
4.2 A
SSIGNING
IP A
DDRESS
To connect the camera to a network using
static IP address, you first need to logon as
an Administrator. Type the Administrator
name and password (both are initially set
to “admin”). Click OK to access
administration menus.