OCEAN PRESENCE OPT-06SD/HD User Manual - page 16
OceanCam User’s Manual
Version: 2.0 7/16/13
Ocean Presence Technologies
Copyright ©2011-2013 All Rights Reserved.
Page 16
Single images can be saved from the live
video stream but video cannot be saved
within this viewer. Additional video
recording software is available on the
Software CD.
4.8 O
PERATION
A
UTHORITY
The Executive Control feature allows users
to wait their turn to manually control the
movements of the camera. Various camera
controls such as day/night, triggered
events and motion detection (not
discussed in this manual) are also
programmable.
Select Exclusive Control mode ON to
activate the operation authority queue. This
button displays the time remaining for
operation authority.
As shown above, the Exclusive Control
button displays the time remaining for
operation authority. However, if operation
authority has not been obtained, the
waiting time is displayed.
A suitable setting is to allow a queue of 5
users each with 120 seconds of operation.
This represents a reasonable amount of
time to wait for access.
4.9 P
OSITION
P
RESETS
& T
OURS
You can set up to 256 camera positions
(pan, tilt and zoom positions). When you
click in the Administrator menu, the Preset
position menu appears. This allows you to
save the camera’s pan, tilt and zoom
positions and set position tours
(programmed action of the camera).
You can configure and save preset
positions and thumbnails. Click Call to
move the camera to a specified preset
position and click Clear thumbnail to delete
the thumbnail information for the specified
preset position.
Select a preset number from 1 to 256 from
the dropdown list. Type the preset position
name of the selected preset number using
up to 32 characters.
To save a preset position:
1. Move the camera to the position to be
saved, while checking the image with
the preview viewer.
2. Select a preset number for saving, and
type the preset name.
3. Click the Set button. The camera
position is saved.
Checking this checkbox registers a
thumbnail when you register a preset
position. Select a radio button to determine
whether to register the current camera
image as a thumbnail or to register with a
specified image.
You can sort preset positions into groups.
The information of the preset positions
registered in a group can be viewed from
the group tree screen. By clicking the
preset position in a group, the camera
moves to the preset position. A preset
position can be registered into a group by
drag and drop.
Resume time on inactivity defines the
restart or stop the tour after it has stopped
by manual pan, tilt or zoom operation or by
camera movement to the preset position