Oceanic GEO 2 Operating Manual - page 16

16

PC INTERFACE 

Interface with a PC, to allow uploading settings and downloading data, is accomplished 

by connecting the GEO 2 to a PC USB Port using the special USB Interface Cable. 

The software program together with the USB Driver required is on the Oceanlog CD, and 

can be downloaded from the OceanicWorldwide web site. The program's HELP** serves 

as the user manual which can be printed for personal use. 

**Prior to attempting to download data from your GEO 2 or upload settings to it, 

review the HELP section of the Oceanlog program. Recommended is to print those 

sections of HELP that you consider appropriate for your Interface activities.

The settings upload portion of the Oceanlog program can be used to set/change the Main 

Time, Date, Set A group (Alarms), Set U group (Utilities), and FREE mode items using the 

same Interface System. FO2 must be set using the control buttons.

Information available for retrieval (download) from the GEO 2 to the PC download portion 

of the program includes dive data such as number, surface interval time, maximum depth, 

elapsed dive time, no deco status, start date/time, lowest temperature under water, sam-

pling rate, dive profile, and set points. 

The Oceanlog program also allows upgrade of select versions of the GEO 2's firmware 

(operating system software) after which the GEO 2 resets all operating data. Since the 

upgrades require reset of the GEO 2, they are blocked during 24 hours after dives.

•  Refer to page 92 for more details relating to Oceanlog and PC Interface.