Oceanic GEO 2 Operating Manual - page 23

23

CDT Status, information includes (Fig. 9):

>  Remaining CDT (hr:min) with ON, if in progress; or 

    0:00 with OFF if the CD is complete; or 

    CDT previously set with OFF

>  Graphic CDT - OFF (or ON)

•  A (< 2 sec) - to step forward through selections of OFF, 

ON, and SET.

•  M (< 2 sec) - to step back through selections.

•  S (< 2 sec) - to save the selection.

>> If OFF or ON is selected, revert to the Lead-in screen.

>> If SET is selected, access the Set CDT screen.

Set CDT, information includes (Fig. 10):

>  Graphics SEt and CDT - OFF

>  CDT (hr:min) with Hour digits flashing 

•  A (hold) - to scroll upward through Hour Set Points at a rate 

of 8 per second from 0: to 23: in increments of 1: (hr). 

•  A (< 2 sec) - to step upward through Set Points one at a 

time.

•  M (< 2 sec) - to step back through Set Points one at a time.

•  S (< 2 sec) - to save the Hour Set Point and flash the Minute 

digits.

Fig.9-CDTSTATUS

Fig.10-SETCDT