Oceanic GEO 2 Operating Manual - page 56

56

Set Safety Stop (SS), information includes:

>  Graphic SEt with Stop arrow/bar icons

>  Graphic SS with Set Point ON (or OFF) flashing, or graphic 

TMR with ON flashing

•  A (< 2 sec) - to step forward through the Set Points (SS OFF, 

SS ON, TMR ON.  

•  S (< 2 sec) - to save the setting.

•  S (2 sec) - to revert to Set DS.

>> If SS OFF (Fig. 56A) or TMR ON (Fig. 56B) is selected, 

operation shall access Set Algorithm.

>> If SS ON is selected (Fig. 56C), Stop Depth and Time is 

displayed with the min and sec icons, Time flashing.

•  A (< 2 sec) - to toggle Stop Time Set Points between 3:00 

and 5:00 (min:sec).

•  S (< 2 sec) - to save the Stop Time setting and flash the Stop 

Depth digits.

•  A (< 2 sec) - to step up through Depth Set Points of 10, 15, 

and 20 FT (or 3, 4, 5, and 6 M) one at a time

•  S (< 2 sec) - to save the Stop Depth setting and access Set 

Algorithm.

Fig.56A-SETSSOFF

Fig.56C-SETSS

TIME/DEPTH

Fig.56B-SETSSTIMER