Oceanic GEO 2 Operating Manual - page 79

79

Fig.88-DV2MAIN

DV 1 (DELAYED VIOLATION 1)

If you remain shallower than a Deco Stop Depth for more than 

5 minutes, operation will enter DV1* which is a continuation of 

CV with penalty time still being added.  Again, the audible will 

sound and the full TLBG will flash (Fig. 87) until it is silenced.

*The difference is that 5 minutes after surfacing from the dive, 

operation will now enter Violation Gauge Mode.

•  S (< 2 sec) - to silence audible.

>  Down Arrow icon continues to flash until descent to below 

required Stop Depth, then full Stop icon will be on solid. 

DV 2 (DELAYED VIOLATION 2)

If the calculated Deco obligation requires a Stop Depth between 

60 FT (18 M) and 70 FT (21 M), operation will enter DV2. 

The Audible will sound and the alarm LED will flash.  The full 

TLBG will flash (Fig. 88) until the audible is silenced. 

•  S (< 2 sec) - to silence audible.

>  Up Arrow icon flashes if 10 FT (3 M) deeper than the 

required Stop Depth.  

>  Once within 10 FT (3 M) of and below the required Stop 

Depth, the Stop icon (both Arrows with Stop Bar) will be 

displayed solid.

Fig.87-DV1MAIN

(duringAudible)