Oceanic OC1 Operating Manual - page 103
103
Fig.92-DV2MAIN
ALTs are similar
to Deco
• S (< 2 sec) to silence Audible
> Down Arrow icon continues to flash until descent to below required Stop Depth
(within Stop Zone), then full Stop icon (Stop Bar with both Arrows) will be on solid.
• L (closure) to activate the Backlight
When descent below the required Deco Stop Depth is made, operation will resume in
Deco with off gassing credit given (Stop Time and TAT decrease).
**The difference between CV and DV1 is that DV1 causes operation to enter Violation
Gauge Mode 5 minutes after surfacing from that dive.
DELAYED VIOLATION 2 (DV2)
If the calculated Deco obligation requires a Stop Depth between
60 FT (18 M) and 70 FT (21 M), operation will enter DV2 (Fig.
92).
The Audible will sound and the red LED will flash. The full TLBG
will flash until the Audible is silenced.
• S (< 2 sec) to silence Audible
> Up Arrow icon flashes if 10 FT (3 M) deeper than the required
Stop Depth.
> Once within 10 FT (3 M) of and below the required Stop
Depth (Stop Zone), the full Stop icon (both Arrows with Stop
Bar) will be displayed solid.
• L (closure) to activate the Backlight