Oceanic OC1 Operating Manual - page 154
154
Reference OP Main, information includes (Fig. 155) -
> Depth with FT (or M) icon, blank on surface
> Reference Mode icon
> Static Arrow icon, diver direction of travel
> Turn Arrow icon (left or right) flashing, while > 10°
deviation from Heading set
> Dynamic Arrow icon, tracking set Reference direction
> Tilt icon, while Compass is tipped to either side (left or
right) at an angle > 20°
> Diver's Heading as 001 to 360° with quadrant graphic
• S (2 sec) or 60 sec - reverts to Surface or Dive Main, or
Watch Time (whichever one access was from)
• A (2 sec) - accesses Auto Home Reference Mode which
changes and flashes the Mode icon (Fig. 156), then -
• S (2 sec) or 60 sec - reverts to Surface or Dive Main,
or Watch Time (whichever one access was from), with
Compass operation remaining in Reference Mode
• S (< 2 sec) - inverts the Heading, and during dives changes
Compass operation to Auto Home.
> On surface operation remains in Reference Mode after
return to the Surface or Dive Main, or Watch Time
(whichever one access was from).
Fig.155-REFOPMAIN
(duringdive,TurnLeft)
Fig.156-REFAUTOHOME