Oceanic OC1 Operating Manual - page 159
159
> position the connector with the red dot at 12 o'clock.
> align the pins of the cable connector with the holes in the
data port and press the connector into the port (Fig. 159A).
> turn the connector clockwise until the red dot is at 1 o'clock
and it locks in (Fig. 159B), then release it.
The OC1 checks for a connection to the Data Port once every
second while the Watch Default Time is displayed. Checks are
not made if the Wet Activation contacts are wet.
When the PC Interface cable is plugged in, the graphic PC
COMM is displayed with a 2 minute countdown timer that runs
until the connection is confirmed, then the graphics PC COMM
CONNECTED are displayed until completion of the upload or
download operation.
Fig.159B-PCICABLE
(turndotto1o'clock)
Fig.159A-PCICABLE
(insertwithdotat12o'clock)
dot
TIMER
(countingdown)
PCICABLE
(connectionsensed)
dot