Octava HDHC48MX-V1.3 Installation manual - page 5
I.R. Remote Control over CAT 5/6:
IR remote signals can be carried over the CAT 5/6 cables to control the
1) matrix and 2) video sources.
1) Connect the IR receiver cable to the CAT 5/6 HDMI receiver as
shown above
2) Connect the IR transmitter cables to the matrix IR TX 1-4 as
shown above.
3) Place and point a IR Transmitter to each video source as shown
above.
Note: No IR transmitter cable needed to control the 4x8 Matrix. The
4x8 Matrix IR control signals are carried directly over CAT 5/6
cables and will control the matrix internally.
Front View
Back View
Switch
Number
1
2
3
4
Name
Smart Scan
Switch
EDID
switch
EDID
switch
Programming/LOCK
switch
Function
Enable/disable
Smart Scan
EDID
MODE
select
EDID
MODE
select
Programming/LOCK.
Down = Smart
Scan Off
Up= Smart
Scan ON
Down=
EDID
Programming mode
Up= Locked
Display LED Indicators
Manual Select
Infrared
Jack
Infrared Detector
DC Power
Input
HDMI Output
(To TV)
CAT5/6 output
(To RECEIVER)
RS232
EDID & Smart Scan
Switch
IR
Transmitter
HDMI Input
4
15