Odyssey Totally Wicked User Manual - page 10
18
19
When the tank is full, check the filler device has completely drained before sliding the
tank body down the cartomizer to its bottom position. Remove the filling device by
twisting it as you pull it up. Finally fit the mouthpiece.
Without pressing the power
button, take two short sharp draws on the mouthpiece to initiate fluid flow from tank
to cartomizer. The Odyssey Tank™ is now ready for first use.
Filling the tank with e-liquid
Holding the tank at an angle of about
45° as shown, and with one sight-
glass facing upwards, slowly pour the
e-liquid into the filler. If the filler air-locks
through filling too quickly, give the tank
a gentle tap until air bubbles appear,
and continue filling at a slightly slower
rate. When the fluid is close to the top of
the sight glass the tank is effectively full.
A small air gap is required for effective
tank system performance. Ensure that
you do not overfill the funnel and that
there is sufficient spare capacity in the
tank to accommodate all fluid poured
into the filler.