Odyssey Totally Wicked User Manual - page 7
12
13
Introducing the Odyssey Tank™
The Odyssey
TM
tank body is precision machined from solid 303 Stainless Steel,
and is lined with heat and impact resistant borosilicate glass to provide effective
sight-glasses that show fluid level. The cartomizers supplied with the kit are unique
to the Odyssey™. You will notice that the cartomizer has two holes, each hole is
1mm in diameter and are placed 180 degrees apart. The position of the holes on
the tube body has been determined to ensure the maximum usable capacity of the
tank. Together, the design of both the cartomizer and the tank has been optimised
to provide what we believe to be the best cartomizer-tank function available on the
market today. The cartomizer is held firmly in the tank’s housing by means of two
O-rings: one at the bottom and one at the top of the tank. The fit of the cartomizer
within the tank is designed intentionally to be tighter than for other tank systems that
you may have used. These seals are vitally important to the operation of the tank
system and every care must be taken to prevent damage during insertion, extraction
and usage. Please follow the instructions provided to ensure that your Odyssey
Tank™ achieves its designed performance.
Priming the cartomizer for the first time
Before first use, every cartomizer must be ‘primed’ with e-liquid. Failure to do so
will cause permanent damage to the cartomizer and affect both the performance
of the cartomizer and the flavour produced by the device. Holding the cartomizer
at an angle as illustrated (FIG 1), drip e-liquid onto the inside wall of the cartomizer
allowing it to run down into the wadding material whilst gently rotating the cartomizer
as shown (FIG 2). Continue to rotate the cartomizer whilst adding more e-liquid,
watching it soak into the material and adding more as it is absorbed (FIG 3&4).
Continue this process until fluid starts to emerge from both 1 mm holes close to the
cartomizer base (FIG 5). This typically takes 5 – 10 minutes.
1
4
2
5
3