OEM Optical IV-CCAM3P Operating Manual - page 13

12

WHITE BALANCE CONTROL

1) Press the Set button to display the main menu on the

monitor screen. 

2) Position the cursor at WHITE BALANCE and  press the

left or right button to change the white balance control

mode.

Three white balance control modes can be selected

according to conditions.

When press the left or right button again, white balance

control will be changed the next mode.

ATW (Auto-tracking white balance) 

The white balance mode is set to auto-tracking white

balance.

This mode is accepted different types of lighting using

an automatic tracking system and automatically controlled

in the color temperature range of 2400K to 10000K.

AWC (Preset white balance) 

Arrange to have a white object present in the scene

and press the Set button to set the Preset white

balance, when position the cursor at WHITE BALANCE

and the mode is AWC.

Setting the preset white balance takes several seconds

and setting is completed when display the message of

" white balance completed " on the screen. If not

completed in about 5 seconds, then again press the

Set button.

MAIN MENU

LENS

: VIDEO

AGC

: ON

Shutter

: OFF

➔ White Balance : ATW

Back Light

: OFF

Text Display

: OFF

Special Menu

End

Note :

The ATW mode may not function properly in

the following cases. 

In such a case, set to the "manual" mode.

Ø

When shooting with non-standard lighting or lighting

with a color temperature that exceeds the range of

the camera.

Ø 

When a large part of the scene is occupied by a

single color or a completely red or blue background.

Note :

In order to avoid failure of AWC mode setting,

do not move the camera or the object until the

message of "white balance completed"

appear.