OEM Optical IV-CCAM3P Operating Manual - page 15

14

Decide a BLC zone number for desired portions of the scene.

1) Press the Set button to display the BLC zone set. 

2) Press the up, down direction buttons to move the

cursor to desired BLC zone.

3) Press the left, right direction buttons to setting the

sensing zone which want to preserve visibility in

important section of the scene.

After setting, press the Set button to return to main

menu.

Text display 

1) Press the Set button to display the main menu on the

monitor screen. 

2) Position the cursor at TEXT DISPLAY and press the left

or right button to setting the text display on.

3) Press the left or right button again, text display setting

returns to off.

TEXT GENERATION 

A maximum of 24 alphanumeric characters (1 line) can be

displayed on the screen. 

1) Press the Set button to text generation when  position

the cursor at TEXT DISPLAY and text display mode

is on. 

2) Press the left, right, up, down direction buttons for

selecting characters. 

Text is generated when press the Set  button for

selected each character.

MAIN MENU

LENS

: VIDEO

AGC

: ON

Shutter

: OFF

White Balance

: ATW

Back Light

: OFF

➔ Text Display

: ON

Special Menu

End

BLC ZONE SET

Zone Display

➔ Zone 1

:  OFF

Zone 2

:  OFF

Zone 3

:  OFF

Zone 4

:  OFF

Zone 5

:  OFF

Zone 6

:  ON

Press SET to Main Menu

Zoom 1

off

Zoom 2

off

Zoom 3

off

Zoom 4

off

Zoom 5

off

Zoom 6

off

Zoom 5

off