OEM Optical IV-CCAM3P Operating Manual - page 21
20
Mounting a lens
①
Remove the lens mount cap from the camera.
➁
Attach or remove the C-mount adapter depending on
the lens to be used.
Ø
If the adapter is attached so tightly that is difficult to
remove, use long-nosed pliers to remove it. Insert
the tips of the pliers into the holes with no threads,
thus turn to remove. Or a screwdriver can also be
used, as shown. Insert M3 screws into the holes so
that the screwdriver has something to grip. (Store
the C-mount adapter for possible future use.)
➂
Attach the lens to the lens mount. Secure it so that it
does not become loose.
➃
If the lens has an auto-iris mechanism, connect the
lens cable to the lens connector.
ADJUSTING AUTO-IRIS LENSES
Make this adjustment after connecting the camera
to a power source and a monitor.
1) Set AGC mode to off.
2) When using a Video type lens : Adjust the level
on the lens to produce minimum smear and
optimum pictures.
3) Set AGC mode to on. It is recommended that
the AGC be used in the “ON” mode after
adjusting the video level.