Ojec-Co H-430RX User Manual - page 15
Page 15 of 15
Cable Options (extra cost)
Type 2.5mm to PC (screwlock) can be used for RX to
Flash PC sync port.
All cables coiled; nominal length uncoiled is 1m.
Shutter Cable Usage (camera model list may not be extensive):
Cable
Type
Usage
C1
Canon 60D, 1100D, 1000D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, G11 and G10 (and
probably other Canon cameras). Also for Samsung GX-20, GX-10; Pentax K20D, K200D,
K10D, K100D (and probably other Samsung and Pentax cameras that use a 2.5mm jack
shutter trigger port connector).
C3
1D, 1Ds, 5D, 7D, 40D, 30D, 20D, 10D (and probably other Canon cameras)
N1
D3 series, D2 series, D1 series, D700 series, D300 series, D200, N90S, F5, F6, F100; Fuji S5
Pro/S3 Pro; Kodak DCS-14n (and probably other Nikon cameras that use the MC-22 round
10 pin connector)
N2
Nikon D70s and D80
N3
D90, D3100, D5000 and D7000 (and future Nikon cameras that use the Nikon MC-DC2
connector)
O2
Olympus E10/E20/E1/E300/E3