Ojec-Co H-430RX User Manual - Introduction
Page 2 of 15
Introduction
The H-430 is designed and manufactured by Ojecoco Photographic Technology Co., Ltd, a specialist
producer of photographic equipment and accessories. This wireless trigger set features separate
transmitters and receivers. It is multi-functional, with wireless synchronized triggering, wireless shutter
triggering, wired shutter triggering, TTL pass-through, grouping and camera relay shooting. It is compatible
with the H-550. The H-430’s multi-functions are compatible with the H-550 (the H-430RX can also receive
HSS signals from the H-550).
Compatibility
The H-430TX is available with two differently configured underside male hot shoes (with matching topside
female hot shoes on both TX and RX):
For Canon
For Nikon
The H-430 can be used* with suitable cameras and flashes from the following manufacturers:
H-430 Variant
Camera Manufacturer
Flash Types
Canon type
Canon
Olympus
OEM Flashes
Compatible Flashes
Studio Flashes
Nikon type
Nikon
Pentax
Samsung
Fujifilm
* Not all H-430 functions may be available with all camera models. In particular, pay attention to older
models of flash and their trigger voltages (maximum safe is 300V attached to the RX), as some may cause
harm to the H-430. It is possible to use the H-430 Canon type as a Nikon type and vice versa if needed, but
some functionality may be lost (such as TTL pass thru and flash wakeup).
Safety Warnings
1.
Before installing or removing the H-430, please make sure the camera or flash are off.
2. The H-430 is not a toy. Please keep out of reach of children and pets.
3.
Turn the power off and take out the batteries if not being used for a long time
.
4. The H-430 is designed to prevent damage to its internal circuits should you accidentally insert the
batteries with reversed polarity. However, please, pay attention to the battery polarity, otherwise the
batteries may leak corrosive liquid, overheat or even explode.