Oki B840dn User Manual - page 23
Menu functions > 23
FX E
MULATION
This menu controls the printer’s FX emulation.
P
ARALLEL
MENU
This menu controls the operation of the printer’s parallel data interface.
ITEM
DEFAULT
REMARKS
CHARACTER PITCH
10 CPI
Specifies character pitch in this emulation.
CHARACTER SET
SET-2
Specifies a character set.
SYMBOL SET
IBM-437
Specifies a symbol set.
LETTER O STYLE
DISABLE
Specifies the style that replaces 9BH with letter o and 9DH
with a zero
ZERO CHARACTER
NORMAL
Sets the zero to be slashed or unslashed.
LINE PITCH
6 LPI
Specifies the line spacing.
WHITE PAGE SKIP
OFF
Selects whether blank pages are printed or not.
CR FUNCTION
CR
Selects whether a received carriage return character (0Dh)
also causes a line feed.
LINE LENGTH
80 COLUMN
Specifies the number of characters per line.
FORM LENGTH
11.7 INCH
Specifies the length of paper.
TOF POSITION
0.0INCH
Specifies the distance of print from the top edge of the
paper.
LEFT MARGIN
0.0INCH
Specifies the distance of print from the left hand edge of the
paper.
FIT TO LETTER
DISABLE
Sets the printing mode that can fit print data, equivalent to
11 inches (66 lines), in the LETTER-size printable area.
TEXT HEIGHT
SAME
Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
CONT PAPER MODE
OFF
Sets printer for using continuous feed stationery.
ITEM
DEFAULT
REMARKS
PARALLEL
DISABLE
Enables or disables the parallel port.
1
1. If the centronics (parallel) port is enabled, the product is no longer Energy Star compliant.
BI-DIRECTION
ENABLE
ENABLE/DISABLE the bi-directional capability of the
parallel interface.
ECP
ENABLE
Extended Capabilities Port, enables/disables this function.
ACK WIDTH
NARROW
Sets ACK width for compatible reception.
ACK/BUSY TIMING
ACK IN BUSY
Sets the order to output the BUSY and ACK signal for
compatible reception.
I-PRIME
DISABLE
Sets time to enable/disable I-prime signal
OFFLINE RECEIVE
DISABLE
To Enable/disable of this function. When set to Enable, the
interface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal only
when the receive buffer is full or a service call occurs.