Oki B840dn User Manual - page 81
Specifications > 81
N
OTES
/
SYMBOLS
/
TERMS
Notes:
1.
When an optional second paper tray is used, the original tray is referred to as Tray 1
and the optional tray as Tray 2.
2.
It is possible to use custom paper sizes with the PS emulation driver.
3.
Tray 1 can accommodate paper with width of 148 to 297mm and length of 182 to
432mm.
4.
Tray 2 and tray 3 can accommodate paper with width of 148 to 297mm and length of
182 to 432mm.
5.
When printing using Auto Duplex, paper will not be ejected face
up.
6.
The printing speed is reduced when you set the paper size of A5, A6, Postcards,
Envelopes as Medium heavy,
Heavy
or Ultra heavy.
7.
Change the ejection mode to face down if the paper is curled up.
8.
Change the ejection mode to face up if the paper curl is large.
9.
When changing media settings, allow 15 seconds for the printer to adjust to the new
setting.
SYMBOL/
TERM
MEANING
T1
Paper Tray 1
T2
Paper Tray 2 (optional)
T3
Paper Tray 3 (optional)
MPT
Multi Purpose Tray
FU
Face Up printing from the rear of the printer
FD
Face Down printing from the top of the printer
W, L
Width, Length in mm
L
Light paper weight: 60 - 66g/m
2
ML
Medium Light paper weight: 67 - 73g/m
2
M
Medium paper weight: 74 - 88g/m
2
MH
Medium Heavy paper weight: 89 - 104g/m
2
H
Heavy paper weight: 105 - 122g/m
2
UH
Ultra Heavy paper weight: 123g/m
2
- 160g/m
2
o
Can be used
x
Cannot be used
U
Can be used depending on the size.