Pacojet PACOJET 2 Instruction Manual

Page of 29

Download

Print this page

Bookmark us

Instruction Manual

Original Instruction Manual in German

Read this Instruction Manual prior to use

1 2 3 4 5 6 7 Next › »

Summary of PACOJET 2

Page 1
1 instruction manual original instruction manual in german read this instruction manual prior to use.
Page 2
3 1 warning 5 2 introduction 9 2.1 what is pacojet 2? 9 2.2 important notes 9 3 package contents 10 4 setting up and connecting power 13 4.1 installation location 13 4.2 connecting the machine to an electrical power supply 14 5 pacojet 2 control components 15 5.1 review of machine controls 15 5.2 on...
Page 3
4 5 6 handling the pacojet 2 28 6.1 pacojet 2 applications 28 6.2 handling of fresh, frozen foods for pacotizing 28 6.2.1 preparatory activities before pacotizing 28 6.2.2 brief description of the pacotizing process 29 6.2.3 detailed description of the pacotizing process 33 6.2.4 after a pacotizing ...
Page 4
6 7 the machine emits sound during processing. Emission n) data can be found in chapter 9. Only the use of original pacojet spare parts is permit- o) ted. The use of other accessories not authorised by pacojet is not permitted. Read the instruction manual for pacojet 2 and famil- p) iarise yourself ...
Page 5
8 9 introduction 2 what is pacojet 2? 2.1 pacojet 2 is an innovative professional kitchen machine designed to puree fresh, frozen foods without thawing into ultrasmooth mousses, naturally-fresh icecreamsandsorbets,aswellasintenselyflavourfulsoups,saucesand creams/fillings.Thisprocessiscarriedoutwith...
Page 6
10 11 one spray guard of black nitrile rubber incl. Inner sealing ring one rinsing insert of green nitrile rubber one cleaning insert of blue plastic, with brushes one blue sealing ring two beaker lids of white polypropylene package contents 3 using this instruction manual as a reference, please tak...
Page 7
12 13 setting up and connecting power 4 installation location 4.1 the pacojet 2 machine should only be installed in a dry location with ade- quateventilationonastable,flatsurfacemeasuringatleast50cm×50cm. Thepacojet2machinemustsitfirmlyandlevel,withitsplacementposition ensuringthefree-flowofcoolinga...
Page 8
14 15 pacojet 2 control components 5 review of machine controls 5.1 on/off switch 5.2 the on/off switch is located toward the back of the lower, right side of the machine base. It is used to turn the machine on or off: “o” = off position = pacojet 2 is off, the switch is not illuminated. “i” = on po...
Page 9
16 17 control panel 5.3 the pacojet 2 control panel has two function buttons: start and stop/ reset/home. It also features a high resolution colour screen, four selector buttons for display functions and two buttons with arrows for increasing and decreasing settings. The following sections describe ...
Page 10
18 19 chopping/cutting mode 5.7.2 chopping or cutting fresh, non-frozen foods with ei- ther the 2- or 4-blade-cutter that are included in the optional pacojet coupe set (see page 21). Please refer to the separate instruction manual for the pacojet coupe set (see page 21), giving par- ticular attenti...
Page 11
20 21 should the same-cycle repetitions option be se- lected and programmed, the shaft and blade/disk will retreat to its starting position between beaker changes, or to the upper level of the selected ap- proximatefillvolumeuntiltheselectednumberof same-cycle repetitions is complete. * the pacojet ...
Page 12
22 23 adjusting the presettings 5.8.4 select the presettings options on the menu to cus- tomize the pacojet 2 presettings according to your needs. The default factory settings are as follows: the default processing mode is “pacotizing” as programmed at the factory. • the “overpressure” function is s...
Page 13
24 25 depressurizing during a processing cycle 5.10 during a processing cycle with an activated “over- pressure” setting, it is possible to depressurize the pacotizing beaker by pressing the appropriate selector button for “depressurize” on the control panel. Pacotizing according to portions 5.11 si...
Page 14
26 27 when a pacotizing cycle has been initiated, pacojet2 can detect overfill immediately when the pacotizing blade meets the frozen surface. In thecaseofoverfill,onlytheamountforwhichthere remains ample volume in the beaker is pacotized, regardless of selected quantities. The pacotiz- ing task wil...
Page 15
28 29 important! Î beakercontentshouldnotcontainemptycavitiesorairpockets.Likewise,the surfaceofthebeakercontentmustbeflat.Disregardingthesedirectionscan damage the pacotizing blade during pacotizing. A) seal the pacotizing beaker with a beaker lid. B) freeze the pacotizing beaker between −18°c and−...
Page 16
30 31 f) select the pacotizing mode on the control panel if it has not yet been selected. G) next, select the number of desired complete portions and/or decimal portions. H) the overpressure function is set by default for pacotizing and may be deactivated as neces- sary using the selector or arrow b...
Page 17
32 33 detailed description of the pacotizing process 6.2.3 insertion of the pacotizing blade with the spray guard into the a) machine graspthepacotizingbladewithtwofingersonthe corners between the blades. Place the pacotizing blade into the center hole of the spray guard, so that the hollow end fitt...
Page 18
34 35 programming pacotizing tasks c) select the pacotizing mode on the control panel if this has not yet been selected. When the protective beaker is mounted correctly, the pacotizing settings are displayed immediately. The overpressure function is set by default for pa- cotizing prior to start and...
Page 19
36 37 if the entire contents of the pacotizing beaker has not been pacotized, the remaining contents must be returned immediately to the freezer! If any paco- tized food content remain in the beaker, the surface mustbeflattenedusingthespatulabeforereplac- ing into the freezer. Holdingtemperaturesbet...
Page 20
38 39 d) select the cutting/chopping mode on the control panel if this has not yet been preselected. The overpressure function is preset as the standard default for cutting/chopping prior to each start butcanbedeactivatedasrequiredbypressing the “normal pressure” button before starting the processin...
Page 21
40 41 select the mixing/whipping mode on the control panel if this has not yet d) been selected. The overpressure function is preset as the stand- ard default for mixing/whipping prior to each start but can be deactivated as required by pressing the “normal pressure” button before starting the proce...
Page 22
42 43 cleaning pacojet 2 7 general 7.1 as with all machines used in food preparation, special attention must be paid to the cleaning procedures for pacojet 2. Meticulously adhering to the cleaning directions is especially crucial when processing animal protein and fatsinthepacojet2(fish,meats,dairyp...
Page 23
44 45 detergent 7.4 in order to achieve a proper hygienic cleaning, use a non-foaming disinfecting detergent in connection with the cleaning process. The following detergents are appropriate examples: ecolab • ® p3 asepto 2000 etc. Ecolab • ® micro quat extra procter & gamble milton sterilizing flui...
Page 24
46 47 select “rinsing cycle” from the display screen and press the start button (see section 5.8). After the completion of a successful rinsing cycle and automatic depressu- rizing, a message appears on the screen informing the operator it is safe to demount the protective beaker. Demount the protec...
Page 25
48 49 the process of cleaning with the blue cleaning insert and disinfecting deter- gent will protect the pacojet 2 food processing system from germs accu- mulation and also, cleanse any remaining food trace elements after a rinsing cycle. Procedure: a) insert an empty pacotizing beaker in the prote...
Page 26
50 51 cleaning accessories 7.9 the parts listed below can be cleaned in a dishwasher: pacotizing beaker of chrome-steel • protective outer beaker • pacotizing blade • spray guard, black • sealing ring, blue • rinsing insert, green • spatula • in order to prevent the accumulation of germs, the pacoti...
Page 27
52 53 ? Pacojet 2 does not create overpressure during a processing cycle the surface of the spray guard is not smooth. Since the spray guard also provides a seal during of the processing cycle, the contact surfaces must be clean and fully intact. Inspect the spray guard for residue or damage. Clean ...
Page 28
54 55 accessories 9.2 the following accessories are available from your pacojet dealer: item pacotizing beaker kit, small (4 chrome steel beakers with lids) pacotizing beaker kit, medium (6 chrome steel beakers with lids) pacotizing beaker kit, large (10 chrome steel beakers with lids) pacojet coupe...