Pacojet PACOJET 2 Instruction Manual - page 11
20
21
Should the same-cycle repetitions option be se-
lected and programmed, the shaft and blade/disk
will retreat to its starting position between beaker
changes, or to the upper level of the selected ap-
proximatefillvolumeuntiltheselectednumberof
same-cycle repetitions is complete.
* The Pacojet Coupe Set, designed to process
fresh, non-frozen foods, is not included in the
original PACOJET 2 system package. The Pacojet
Coupe Set is available as a optional add-on and
can be purchased from a Pacojet sales point.
Please refer to the separate instruction manual for
the Pacojet Coupe Set, giving particular attention
to the safety guidelines.
Cleaning cycles and machine settings
5.8
The lower right selector button next to the lower
right icon can be pressed to switch to another dis-
play screen containing further options for cleaning
and general machine settings (or when pressed
again, to return back to the home screen).
There are two cleaning cycle options on the left side
of the display screen. Select the upper icon for a rins-
ing cycle or the lower icon for a full cleaning cycle.
The settings functions can be accessed by pressing
the selector button on the upper right of the control
panel, adjacent to the “cog-wheels” icon shown on
the display screen.
1/2
3
As soon as the protective outer beaker is mounted
and rotated into the correct position, the next dis-
play screen will appear with the default processing
settings selected for “Chop/Cut entire contents of
beaker” and “overpressure”; however, with the pos-
sibility of selecting the processing option “deacti-
vate overpressure before chopping”.
This processing option can be selected by pressing the appropriate selector
button adjacent to the processing mode icon, as shown on the display and be
furtherdefinedusingthearrowbuttons.
Mixing/Whipping mode
5.7.3
Mixing/Whippingfresh,liquidfoodsutilizingthepa-
cotizing blade or the whipping disk included in the
optional Pacojet Coupe Set (see page 21).
For further programming processing options within
the mixing/whipping mode, either the pacotizing
blade or the whipping disk (as supplied within the
Pacojet Coupe Set package) must be positioned
within the spray guard and correctly secured onto the
magnetic, splined shaft of the PACOJET 2 machine.
Then the pacotizing beaker and the protective outer
beaker must be correctly mounted in the machine.
As soon as the protective outer beaker is mounted
and rotated into the correct position, the next dis-
play screen will appear with the default processing
settings selected for “Mixing/Whipping entire con-
tents of beaker” and “overpressure”; however, with
the options of selecting the processing options “de-
activate overpressure before mixing/whipping”, “set
theapproximatefillvolumeinthepacotizingbeaker
in terms of portions” and “set the number of same-
cycle repetitions”.
10