Pacojet PACOJET 2 Instruction Manual - page 12
22
23
Adjusting the presettings
5.8.4
Select the Presettings options on the menu to cus-
tomize the PACOJET 2 presettings according to
your needs.
The default factory settings are as follows:
The default processing mode is “pacotizing” as programmed at the factory.
•
The “overpressure” function is set by default at the factory for each process-
•
ing mode.
Processing options chosen for a previous cycle are reset to default/factory
•
settings after each processing task, i.e. each beaker change.
Consequently,eachtimetheON/OFFswitchisusedtopoweronthema-
chine, the “pacotizing” and “overpressure” processing modes are already set.
The other processing modes, chopping/cutting and mixing/whipping are also
displayed on the home screen and may be selected by pressing the corre-
sponding selector button prior to each processing task.
Users can deactivate the default setting for overpressure by using the over-
pressure selector or the arrows buttons before beginning a particular process-
ing cycle.
After a processing task has been completed, the PACOJET 2 automatically
returns from the previous mode selected and programmed processing option
back to the default factory settings for “pacotizing” and “overpressure”.
However, it is possible to adjust and/or override the default factory- and other
presettings, according to a user’s particular needs.
Presettings
Mode
Pressure
Reset
Factory setting
Rinsing cycle
5.8.1
To rinse the PACOJET 2 food contact components,
please see section 7.
Full cleaning cycle
5.8.2
The procedure for implementing a full cleaning cy-
cle of the PACOJET 2 food contact components
can be found in section 7.
Machine settings
5.8.3
Pressing the button to access the machine settings
on the selector panel will display the settings se-
lectionsfor“Presettings”,“Brightness”,“Language”,
as well as the usage information selections “Portion
counter” and “Version”.
Using the up- and down-arrow buttons, select the desired setting option and
confirmtheselectionbypressingthebuttonadjacenttothevalidationicon
(check mark) on the display screen.
In the above mentioned manner, one can modify the settings for “Presettings”,
“Brightness”and“Language”,programmingthemindividuallybypressingthe
validation button.
Using the arrow buttons and the validation button, one can also select and
view the “Portion counter”, which tracks the total number of pacotized whole
portionsthemachinehascompleted,orconfirmtheversionofyourmachine
by selecting “Version”.
Settings
Presettings
Brightness
Language
Portion counter
Version