Panasonic DP-MC210 Quick Reference Manual - 1.5 Dialing Mode
1. Introduction and Installation
11
Detailed operating instructions are on the CD-ROM.
Note:
L
If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L
A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.
Using surge protectors
L
The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using a surge protector (
9
).
Using network router/network hub
L
We recommend using network routers/network hubs
(
6
) under secure network environments. Consult
your network administrator for firewall settings, etc.
L
The warranty does not cover damage due to security
problems or any disadvantages relating to it.
1.4 Turning the power switch ON
Turn the power switch to the ON position (
1
).
1.5 Dialing mode
If you cannot dial, change this setting according to your
telephone line service.
1
{
Menu
}
2
Press
{#}{
1
}{
2
}{
0
}
to display
“
Dialing Mode
”
.
3
Press
{
1
}
or
{
2
}
to select the desired setting.
{
1
}
“
Pulse
”
: For rotary/pulse dial service.
{
2
}
“
Tone
”
(default): For tone dial service.
4
{
Set
}
5
Press
{
Menu
}
to exit.
1.6 Selecting the operation mode
(Scan/Copy/Fax/Print)
You can select the desired mode by pressing one of the
following buttons.
–
{
Scan
}
: Select this mode when using the unit as a
scanner.
–
{
Copy
}
: Select this mode when using the unit as a
copier.
–
{
Fax
}
: Select this mode when using the unit as a fax
machine.
–
{
}
: Select this mode when using the unit as a
printer.
Document Requirements
1.7 Setting the original
1.7.1 Using the scanner glass
1
Open the document cover (
1
).
2
Place the document FACE DOWN on the scanner
glass (
2
), aligning the top left of the document with
the corner to which the
m
mark points.
3
Close the document cover.
1
2
1
MC210C-PNQW1741ZA-QRG-en.book Page 11 Monday, February 23, 2009 1:29 PM