1. DL manuals
  2. Plinius
  3. Amplifier
  4. P7
  5. Instruction Manual

Plinius P7 Instruction Manual

Summary of P7

  • Page 1

    Plinius p7 instruction manual. Page 1 the plinius p7 stereo power amplifier congratulations on your decision to become the proud owner of the plinius p7 power amplifier. This manual has been prepared to help you understand the operation of your amplifier and to provide some information about its des...

  • Page 2

    Plinius p7 instruction manual. Page 2 list of contents warnings and precautions. Page 3 amplifier facilities and features. Front panel. 4 amplifier facilities and features. Rear panel 4, 5 installation and operation. 5, 6 mains / line power connection. 6, 7 connections for operation. 4 loudspeakers....

  • Page 3

    Plinius p7 instruction manual. Page 3 warning the p7 power amplifier can be operated in excess of 100 watts into 8 ohms. This amplifier is also capable of a very large peak current delivery. This p7 power amplifier operates in class ab and is therefore capable of generating a moderate temperature an...

  • Page 4

    Amplifier facilities and features front panel the front panel of the p7 power amplifier incorporates a panel fitted with one switch, this controls the amplifier. Mains switch. This heavy duty rocker switch to the left of this panel switches the mains / line power to the amplifier on or off. A led im...

  • Page 5

    Plinius p7 instruction manual. Page 5 quality of the connections must be examined to ensure a high performance, trouble free operation is enjoyed. Check that the connections are tight, but do not overtighten with excessive use of spanners etc. If bare wires are used, make sure that no loose strands ...

  • Page 6

    Plinius p7 instruction manual. Page 6 placement and ventilation. This p7 is designed to operate at a moderate temperature. The ideal location is on a rigid stand or floor mounted away from direct contact with any objects, materials or deep pile carpets which may interrupt the flow of air around and ...

  • Page 7

    Plinius p7 instruction manual. Page 7 mains / line fuse. A mains / line fuse is fitted within the iec mains / line socket on the rear of the amplifier. A small draw at the bottom of this socket may be removed ( after the iec plug is removed ) by levering it out with a flat blade screw driver. The fu...

  • Page 8

    Plinius p7 instruction manual. Page 8 loudspeakers this amplifier is designed for use with hifi quality loudspeakers. It should not be used to operate with any other type of appliance or equipment not intended or designed for use with this amplifier. Choice of loudspeakers is one of personal taste, ...

  • Page 9

    Plinius p7 instruction manual. Page 9 specifications: 100 watts continuous power per channel into 8 ohms, both channels driven from 20hz to 20khz at less than 0.1% total harmonic distortion from 0.25 watts to rated output. 160 watts continuous power per channel 20hz to 20khz into 4 ohms. Dynamic hea...