Plinius P7 Instruction Manual - page 9
Plinius P7 instruction manual. Page 9
Specifications:
100 Watts continuous power per channel into 8 ohms, both channels driven from 20Hz to
20kHz at less than 0.1% Total Harmonic Distortion from 0.25 Watts to rated output.
160 Watts continuous power per channel 20Hz to 20kHz into 4 ohms.
Dynamic headroom
1dB or greater at 8 ohms with music.
Frequency response
20Hz to 20kHz ± 0.2dB
-3dB at 5Hz, -3dB at 90kHz.
Distortion
Typically 0.05% and IM at rated power, 0.1% THD and IM worst case prior to clipping.
Saturation
120 Watts per channel or greater into 8 ohms.
Voltage swing
87 Volts peak to peak per channel
Current output
30 Amps short duration continuous per channel.
Fuse protected.
Rise time
Typically 4 microseconds.
Slewing
50 Volts/uS
90dB below rated output 20Hz to 20kHz unweighted.
Input sensitivity / Input impedance
1.2V RMS 47k ohms for rated output.
Input overload
5V RMS
All operational, technical and descriptive material published here is subject to change at any time without notice.
PLINIUS
amplifiers are designed and manufactured by:
AUDIBLE TECHNOLOGIES Ltd.
P.O. Box 1836,
PALMERSTON NORTH.
NEW ZEALAND.
DIMENSIONS:
Height : 100mm Width 440mm
Depth : 300mm Weight 8kg