Pneumercator ETD1000 Instruction Manual - page 22
ETD1000 Instruction Manual - 2017-07-01.docx
Page 22 of 28
July 1, 2017
3.2.1 Programming Procedure
View
View Tank Contents:
Press and release MODE
Change Displayed Units:
Hold MODE until one beep
View DifferentTank Number:
Press and releaseTANK SELECT
Enable / DisableAutocycleTank Number:
Hold TANK SELECT until one beep
Note
Capital Letters represent ETD displa
y.
Lower case letters added for clarit
y.
Reverse text
indicates the following:
Name of the programming section.
Explanation of display.
Section-specific navigation instructions.
Closed shapes indicate names of
Menus while open brackets indicate
names ofValues.
VIEW
ACCESS
While holding the Test button, hold the Mode button until LOG is displayed.
SYSTEM TEST
While holding the Test button, all internal visual and audible annunciators are tested.
ETD Navigation Flowchart
ETD1000 Firmware V20.06
ETD1000W Firmware V10.14
Programming Instructions
Change Currently DisplayedValue*:
Press and releaseTEST
Exit and Save Changes:
Navigate past all settings as instructed
*EDIT ENABLE switch must be set to allow changes
Relay 16 TANK
Relay 16 ALARM
Relay 2 TANK
Relay 2 ALARM
Relay 1 TANK
Relay 1 ALARM
REL AY TIME delayed shuto ff
NORMAL LY
REL AY MODE
Shows Current Value for displayed Relay Setting
Advance to next Relay Setting by holding MODE until one beep
water ( WATER led)
sp3 (SP3 led)
sp2 (SP2 led)
sp1 (SP1 led)
leak (LEAK led)
temperature (TEM P led)
water level (W & LEVE L led)
product level (LEVE L led)
ullage (UL L led)
percent volume (%VO L led)
net volume (VO L and TEM P led)
gross volume (VO L led)
display MODE ENaBLe
Shows Units or Alarm LED(s) and YES/NO
Advance to next Display Mode by holding MODE until one beep
tank channel 12 enable
tank channel 3 enable
tank channel 2 enable
tank channel 1 enable
TANK ENaBLe
Shows Tank Channel Number and
YES/NO
Advance to next Tank Channel by holding
TANK SELECT until one beep
REMINDER: Dipswitch S4-8 must be set to ENABLE for front panel
programming. See Section 3.1 for details.