PS Audio Power Plant P1000 Operation Manual - page 2
Warning
To prevent fire or shock hazard, do not expose
the unit to rain or moisture. To avoid electrical
shock, do not open the enclosure. Refer ser-
vicing to qualified personnel only.
To prevent electric shock, use a 3 prong,
grounded type power cable.
Any change or modifications not expressly
approved in the manual could void your war-
ranty.
Safety Instructions
Any turntable or equipment with AC synchro-
nous motors, such as some cooling fans
should not be used with MultiWave II. This
equipment must be used with 60Hz SineWave
mode, or connected to the Filtered AC zone
outlets.
We recommend the use of the SineWave
[SINE] or TubeWave [TWAVE] with any type of
tube based audio products.
Read the operating instructions provided with the
P1000.
Retain the operating instructions for later use and
reference.
Unplug the P1000 from the wall outlet
before changing the fuse or performing
any cleaning or service.
Do not operate the P1000 near water.
Avoid placement near a water reservoir or
excessive moisture.
When replacement parts are required, be
sure they are specified by the manufac-
turer to have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
Do not operate with faulty or frayed power
cables.
Overview
The Power Plant P1000 is a power regenerator
capable of delivering the highest level of AC per-
formance to all audio and video components.
The PS Audio Power Plant P1000 is designed
to operate as a stand-alone power management
device, or as part of a larger power management
system. In many cases one P1000 will be all
that is necessary to protect, clean and regener-
ate power for any audio system or home theater
system.
The P1000 has two power delivery zones: Eight
outlets produce “Regenerated AC” with MultiWave
II™. Two outlets pass “Filtered AC” by filtering
power with Ultimate Outlet™ technology.
The Regenerated AC zone is capable of deliver-
ing up to 1000 watts of peak power, depending on
the load. The filtration zone is not current limiting
and will deliver as much power as a 15 amp wall
socket can provide.
All settings in the P1000 are non-volatile. Any
changes made to the settings will not be lost, even
if the P1000 is disconnected from AC power.
2