Q-See QT5116 User Manual - Basic Functions
BASIC FUNCTIONS
QT518 & QT5116 User Manual
27 |
P a g e
3.6 PTZ Control
Connect speed dome cameras to the DVR using the RS485 connection first (see 2.3 Rear Panel Instructions). Make
sure the speed dome has a protocol this DVR supports and the parameters have been set according to the
specifications called for in the camera’s manual.
Step 1: Right click on the mouse to enter the control bar functions illustrated in Fig 4.1 Control Bar. Enter
Menu---->System-
PTZ. A dialog will open as shown in Fig 3.26 PTZ Setup.
Fig 3.26: PTZ Setup
Step 2: Set protocol, baud rate, and address according to the parameters of the speed dome.
Step 3: Click the “Set” button to the right of the Preset field (as shown in Fig 3.26) to specify a range of PTZ options
which can be stored in your system. As shown in Fig 3.27 Set Presets, you can adjust the Zoom, Focus, Iris and
Speed and save them as a preset. A total of up to 16 Presets can be stored in your system.
Fig 3.27: Set Presets