Q-See QT5116 User Manual - Basic Functions
BASIC FUNCTIONS
QT518 & QT5116 User Manual
28 |
P a g e
Step 4: Click the “Set” button to the right of the Cruise field (as shown in Fig 3.26) to set cruise tracks as shown in Fig
3.28 Set Cruise. Choose the preset, set the time of every preset. Click + button to add the preset to the left preset for
cruise track.
Fig 3.28 Set Cruise
Step 5: Select a preset in left preset list, click – button to delete the preset. Click
↑,↓,↑,↓ to adjust the sequence of the
presets in the auto cruise setup. Click Save to save and return to the previous interface. Click the OK button to save
and exit.
Step 6: Right click on the mouse to enter the control bar functions illustrated in Fig 4.1 Control Bar. Click Enter
Menu---->System-
PTZ. A dialog will open as shown in Fig 3.29 PTZ Control.
Fig 3.29 PTZ Control
Select the speed dome. Click the direction buttons to move the camera. Click the relative + and – buttons to adjust
zoom, focus, IRIS and speed. Click
□ button to erase the adjustments and revert to previous settings.
Select the preset, the speed dome will go to that point directly. Select Cruise, it will do auto cruise.