QTek 8500 User Manual - 14.
86 Getting Connected
14.
To use your phone as a GPRS modem, set the
Access point
name (APN)
. To set, click
Menu > APN Setting
and enter the
access point name.
15.
On your notebook, disable ActiveSync.
Note
To disable ActiveSync on your computer, click
File > Connection
Settings
and then clear
Allow connections to one of the following
.
16.
Click
Menu > Start
on your phone.
After successfully connecting your phone to the computer via
Bluetooth, the next thing to do is to add your phone as a Bluetooth
modem to your computer.
To add the phone as a Bluetooth modem
1.
On the computer, click
Start > Control Panel > Phone and
Modem Options
.
2.
Click the
Modems
tab. Check if there is a Bluetooth modem,
“Generic Bluetooth Modem” or “Standard Modem over Bluetooth
Link,” listed. If there is, skip to step 6.
3.
If there is no Bluetooth modem listed in the Modems tab, click
Add
.
4.
In the Add Hardware Wizard, click
Next
.
5.
In the Select Bluetooth Device screen, select the phone name
and then click
OK
.
6.
In the Modems tab, select the Bluetooth modem listed and then
click
Properties
.
7.
Click the
Advanced
tab, then in the
Extra initialization
commands
text box, enter:
AT+CGDCONT=1,”IP”,”APN”
where APN is the access point name provided by your mobile
network operator to give you access to the Internet. Then click
OK
.
8.
Click
OK
to exit the Phone and Modem Options.
Your phone is now set up as a Bluetooth modem. For details about
how to connect to the Internet, see “Dial-up and connect to the
Internet” in this chapter.