QTek 9000 User Manual - Connect Through A Usb Port
104
|
Getting Connected
Connect through a USB Port
To connect through a USB port, you need to first set up a USB modem
on your PC. Before setting up a USB modem, verify that you have the
following files:
• USBMDM
• USBModem_Dialer
Both files are available on the Getting Started CD. Run the Getting
Started CD from the CD-ROM of your PC and do the following on your
device:
1.
On your device, tap
Start > Programs > Wireless Modem.
2.
Select
USB as the connection type, and insert the USB cable
adapter.
3.
Tap
Start on the Wireless Modem screen of your device.
The Found New Hardware message appears on your PC.
4.
On your PC, select
Display a list of the known drivers for this
device so that I can choose a specific driver and click Next.
5.
In the
Hardware types list, select Modem and click Next.
6.
Click
Next.
7.
Click
Have Disk.
8.
Click
Next.
9.
Select the recognized USB Modem from the
Modems list.
10.
Click
Next.
11.
Click
Finish.
12.
On your PC, click
Start, click Settings, and click Control Panel.
13.
Double-click
Phone and Modem Options.
14.
Select the new USB modem from the
Modems list.
15.
Double-click the
USB Modem Dialer file on the Getting Started
CD.
16.
Enter the GPRS settings (enter the APN assigned by your ISP)
17.
Click
Dial to start the connection.