QTek 9000 User Manual - •
92
|
Getting Connected
To reset or modify the network card settings on your device
1.
Tap
Start > Settings > Connections tab > Network Cards.
2.
In the
My network card connects to list, select the appropriate
item:
•
If you want to connect to the Internet using your ISP, select
The Internet.
•
If you want to connect to a private network, select
Work.
3.
In
Tap an adapter to modify settings, tap the appropriate
adapter.
The fields on the IP Address tab are populated automatically.
4.
Configure the TCP/IP settings, if required.
If your ISP or private network does not use dynamically-assigned
IP addresses, tap Use specific IP address and enter the
requested information. Contact your ISP or network administrator
to obtain the IP address, subnet mask, and/or default gateway (if
required).
5.
Configure the DNS and WINS settings, if required.
If your ISP or private network does not use dynamically-assigned
IP addresses, enter the requested information on the Name
Servers tab. Servers that require an assigned IP address may
also require a way to map computer names to IP addresses. DNS
and WINS are the resolution options supported on your device.