QTek s100 User Manual - Connect Via Bluetooth

Pocket PC Phone User Manual

102

Pocket PC Phone User Manual

103 

  2. Select  the 

USB  connection  type  from  the  drop-down  list  and  insert  the  USB  cable 

adapter.

  3. Tap the 

Start button on the Wireless Modem screen of your Pocket PC Phone.

  4. A 

Found New Hardware message will pop up on your desktop PC.

  5. Select the

 Display a list of the known drivers for this device so that I can choose a 

specific driver option, and then click Next.

  6. Select 

Modem from the Hardware types list, and then Next.

  7. Click the 

Have Disk button, and then Next.

  8. Select the recognized 

USB Modem in the Models list, and then Next. After the installation 

is completed, select 

Finish.

  9. After the installation, a new 

USB modem will be found in the Modem list by tapping Start 

> Settings > Control Panel > Phone and Modem Options on your PC.

10. Double click the 

USBModem_Dialer file on the Application CD and set the GPRS settings 

(enter the 

APN assigned by your ISP) in the blank text box and press Dial to start the 

connection.

Connect via Bluetooth

Before starting to use your Pocket PC Phone as a 

Bluetooth modem, you must be sure that 

your PC is a 

Bluetooth-enabled device. In addition, you still need to check the following:

n

A 

GPRS enabled SIM card is inserted in your Pocket PC Phone.

n

Disable the 

ActiveSync BT port connection of your PC.

n

Disable the 

Infrared function by tapping the Start menu > Settings > theConnections 

tab 

> Beam. Uncheck Receive all incoming beams.

1. To begin, select the 

Start menu > Programs > Wireless Modem.

2. Select the 

Bluetooth connection type from the drop-down list, and tap the Start button.

3. Open your Pocket PC Phone from the 

Bluetooth application installed on your PC.