QTek s100 User Manual - Add Ring Tone
Pocket PC Phone User Manual
84
Pocket PC Phone User Manual
85
Add ring tone
Add Ring Tone allows you to quickly find and display all the ring tones stored on your
device, gives you the option to listen, add, or remove them from the
Phone Settings list
mentioned above.
1.
To display all ring tones on your device, you can tap the
Start menu > Settings > System
> Add Ring Tone. The program will automatically list and display all the .wav and .mid
files on your Pocket PC Phone.
2.
After the ring tones have loaded, you can see that some are already selected. These ones
are presently listed in the phone settings.
3.
To play a ring tone, select one by tapping it, and then tap play. If you don’t like the ring
tone, deselect it. This will add/remove the selected/deselected ring tones from the list in
your phone settings.
Keypad tone
You can change the tone you hear when entering a phone number on the keypad. If set to
Tones, the tone is heard continuously for as long as the number on the keypad is pressed.
If set to
Beep, the tone is heard only for one or two seconds.
1.
Tap the
Keypad list, then select the option you want.
2.
To prevent tones from being heard when entering a phone number, select Off.
Network
With network settings, you can view available networks, determine the order in which your
Pocket PC Phone accesses another network if the current one is unavailable, and specify
whether you want to change networks manually or automatically. The current network will
remain active until you change it, lose your signal, or change your
SIM card.
n
The network currently in use will be listed at the top of the screen.
n
When your current network is unavailable, tap
Select Network to select an alternate.