QTek s100 User Manual - Receiving A Bluetooth Beam

Pocket PC Phone User Manual

98

Pocket PC Phone User Manual

99 

Receiving a Bluetooth Beam

1. Make sure that your device is configured to receive incoming beams and that 

Bluetooth 

is in discoverable mode.

2. Make sure that your device is within 10 meters of the device beaming the information.

3. When prompted to receive an incoming beam, tap 

Yes. 

The information is now stored on your device.

Using a Bluetooth Phone as a Modem

You can use a phone that has Bluetooth capabilities as a modem for your device. To do this, 

you create a Bluetooth modem connection on your device and then send information to the 

phone by using Bluetooth. The phone relays the information over the phone line and then 

sends back to your device any information that you had requested over the connection. 

Once you create a modem connection to the Bluetooth phone, you can reuse it whenever 

you want to use the phone as a modem.

  1. Make sure that the Bluetooth phone is turned on, that your device’s and the phone’s 

Bluetooth radios are turned on, and that your device and the phone are within 10 meters 

(10 meters) of one another.

  2. If you have not already done so, create a Bluetooth phone connection by following 

  3. Tap 

Start  menu > Settings > Connections tab.

  4. Tap 

Connections > Add a new modem connection.

  5.  Enter a name for the connection.

  6. In the 

Select a modem list, tap Bluetooth > Next.

  7. Make  sure  that  the  phone  is  discoverable.  Some  phones  may  also  need  to  be 

pairable  in  order  to  accept  a  bonding  request.  For  more  information,  see  your  phone 

documentation.