Quadro DECT-4200 User Manual - Auto Talk

… press briefly, set the volume using 

 and press 

… press and hold, select the external melody using 

  and press

Auto talk

☞

If Auto talk is on an incoming call will immediately be taken when the handset 

is taken from the base.

… press, select HANDSET using 

  and press

Select AUTO TALK and press

Select ON or OFF and press

Handset name

In idle state the handset name and the internal telephone number is shown in 

the display.

… press, select HANDSET using 

  and press

Select HANDSET NAME and press

Delete the old name using

Enter the new name using the digit keys and press

Keypad beep

The keypad beep is an acustical confirmation for a pressed button.

… press, select HANDSET using 

  and press

Select KEYPAD BEEP and press

Select ON or OFF and press

Selecting a base station

If the handset is subscribed to several bases you can select the active base. 

The setting “AUTO“ means, that the handset will automatically search for the 

base station with the strongest signal (only in idle mode).

… press, select HANDSET using 

 and press

Select SELECT BASE and press

Select AUTO or MANUAL and press

If “MANUAL“ is selected, all bases the handset is subscribed to are 

shown. Select a base and press         .

or the handset is in idle state

 / 

 / 

 / 

 / 

 / 

☞

 / 

 / 

☞

 / 

 / 

 / 

☞

 /   

 / 

 / 

10

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

OK

ENGLISH