Quadro DECT-4200 User Manual - Registering A Handset
Registering a handset
☞
Five handsets can be registered to a base station. The handsets delivered
with your telephone are already registered. To register a “foreign“ handset please
refer to it’s user manual.
First of all disconnect the power adaptor plug from the base station and
re-connect it.
After this the base station will be in registration mode for three minutes.
… press, select REGISTER using
and press
Select a base station to subscribe to and press
Enter the base’s PIN (DECT-4200 base station in delivery state “0 0 0
0“) .
Deleting a handset
You can delete a handset from a base to allow another handset to be
registered. Note: you can only remove other handset in your system but you are
not able to remove the handset you are using.
… press, select DE-REGISTER using
and press
Enter the PIN for the base station (DECT-4200 base station „0 0 0 0“).
Enter the internal telephone number (1…5) of the handset you want to
remove and press
/
/
☞
/
12
OK
OK
OK
OK
OK
OK
ENGLISH