Quadro DECT-4200 User Manual - 4. Telephoning

4. Telephoning

Taking a call

Your phone is ringing. Press the call key.

Making a call

Enter the phone number. Delete wrong characters by pressing .

The phone number is being dialled.

☞You can also press the call key and you will hear the dialling tone. 

The entered number will be dialled immediately. It is not possible to 

correct wrong digits individually using this dialling procedure.

Ending a call

Press the call key or replace the handset in the base station.

Activating Hands-free

When you are in a call you can switch on/off the loudspeaker      

appears in the display when the loudspeaker is on.

Call timer

Your handset automatically times the duration of every call.

Setting the earpiece/loudspeaker volume

During a call you can adjust the volume in 5 levels (if telephoning 

“normally“ -> earpiece volume, with hands-free -> loudspeaker volume).

Muting the microphone

During a call you can switch your handset’s microphone off. The display 

shows

To unmute press           again.

Redial

☞Your handset saves the last 3 dialled telephone numbers.

Viewing/dialling telephone numbers

The handset is in idle state.

… press repeated (if necessary) until the desired telephone number is 

displayed.

… the phone number is being dialled.

☞Once you already pressed the call key and can hear the dialling tone, the very 

last dialled telephone number is dialled by pressing the redial key.

ENGLISH

5