QUALIA & Co INDIGO Series Owner's Manual - page 10
9
●
When connecting a cable, confirm that the power cable is not connected.
Connecting a cable with the power on may damage the Main Unit and the equipment to be connected,
which may result in an electric shock.
●
Before connecting equipment, thoroughly read the instruction manual for each device and turn off the
power. Then, connect the equipment following the instructions. Use high-quality connection cables.
●
Connect/disconnect the RCA interconnect cable while keeping it straight and without turning the plug.
Connecting/disconnecting while turning the plug may rotate the terminal on the Main Unit, causing
disconnection. Be sure to connect/disconnect the cable while keeping it straight.
Unbalanced RCA connection
Audio equipment can be connected.
Note: Before connecting equipment, clean all terminals and cable plugs.
Unbalanced input terminal (A, B, C)
Three systems of RCA jack unbalanced input terminals are available (A, B, and C).
Be sure that the terminal arrangement is correct before connecting equipment.
Connect the unbalanced output terminal of a CD player, D/A converter, DVD audio player, tuner, or other device
using an RCA interconnect cable. (The three input terminals (A, B, and C) have the same function.)
Connection (Input)
R
L
CD Player
Phono equalizer amplifier
R
L
Lch "A"
Input
Rch "B"
Input
Rch "A"
Input
Rch "RCA"
Output
Lch "B"
Input
Lch "RCA"
Output
Lch "C"
Input
Rch "C"
Input
120
5
Power switch
OFF