Quality Craft M903L-48BHO/BDC Instruction Manual - page 9
9
O P E R A T I O N
of 1875 WATTS. Once the fireplace insert
has been properly connected to a grounded
electrical outlet, it is ready to operate.
OPERATION BY THE
CONTROL PANEL
The controls are located behind the grill
below the front glass and can be accessed
by pulling the grill from the top, forward and
down.
WARNING: DO NOT TOUCH. HOT SURFACE
AT CENTRE OF GRILL. HANDLE LEFT OR
RIGHT SIDE OF GRILL WHEN PULLING OUT.
O/I: Press this button for main power and
flame effect. The indicator light will turn on.
750W: For low heat function - Press this
switch while the O/I switch is in the on
position for low heat. The indicator light
will turn on.
1500W: For high heat function - Press this
switch while the O/I switch and the 750W
switch are in the on position for high heat.
The indicator light will turn on.
TEMPERATURE CONTROL: To adjust the
temperature to your individual requirements,
turn the temperature control dial to the right
(clockwise) to increase the desired tempera-
ture and to the left for lower temperature.
This temperature control dial can only be
used while the O/I switch and 750W & 1500W
switches are in the ON position. When the
heater reaches to the desired temperature,
the heater and 750W/1500W indicator light
will off but the fan still keeps working with air
flow. Adjust this knob to restart the heater.
DIMMER CONTROL KNOB: Turn the dimmer
dial clockwise or counter clockwise to get the
desired flame intensity. The dimmer switch
can only be used when the O/I switch is in the
on position.
NOTE: When the O/I switch is turned off, the
heater functions will stop even though the
switches may be in the ON position.