Quantum PX500 Series Firmware Upgrade Manual - page 5
Other manuals for PX500 Series:
Upgrade Instructions, Upgrade Instructions, Quick Start Manual, Release Note, Installation Instructions Manual, User Manual
Manual is about: Quantum PX500: User Guide
of
8
Quantum PX500 Series Firmware Upgrade Instructions for Stacked Libraries
Document 81-81802-01A01
April 2007
Uploading Library Firmware
5
2
Use the OCP to determine the IP address for the library. The
Network
information
is available from the
Info
menu.
3
On the host computer, open the internet browser software.
4
In the
Address
field, type http://IPaddress/ where IP address is the IP
address for the library.
5
Enter the username and password and click
OK
.
The
Overview
page displays (see
figure 4
).
Figure 4 Overview Page
6
Click the
Utilities
tab at the top of the page.
The
Utilities
page displays (see
figure 5
):
Note:
The default username and password is
admin
.