Quantum PX500 Series Release Note - page 5
Release Notes
Document 5502252 Rev C
August 2008
Resolved Issues
5
PCR 19295
The pass-through calibration has been improved.
PCR 19345
In a partitioned system, from the host interface, you can move a tape in the gripper from
one partition to a second partition.
PCR 19373
No UA queued following library offline/online transition (nFC only).
PCR 19387
The Hardware Status page is reporting half-height tape drive installation incorrectly.
PCR 19449
The format of the serial number on the OCP has been improved.
PCR 19510
CDB's are not rejected when the link bit is set in control byte.
PCR 19543
When a Fibre Channel switch is attached to a FC Scalar 50, the WWNN and WWPN are
identical.
PCR 19603
Setup Wizard creates a partition with invalid elements.
PCR 19635
Setup Wizard
Configuring SCSI devices panel
is not wrapping all windows with Mozilla
firefox.
PCR 19636
The Setup Wizard must not include setting up partition options for parallel SCSI and
bridged SCSI hosted systems.
PCR 19674
Persistent reserve out register service action doesn't enforce APTPL bit
PCR 19676
Reservation conflict status returned to host with a valid I_T nexus registration following
library power cycle with APTPL bit set.
PCR 19852
Warn user that reconfiguring slave as a standalone will remove the partitioning
configuration
PCR 19858
A perpetual java loop is entered when an operation is attempted requiring the library to go
offline.
PCR 19973
Tape stuck in jammed pass-thru is reported in both hands.
PCR 20083
Pass-thru slot 2 calibration may be incorrect.
PCR 20084
Add optional TA's: cooling fan (0x1B) and power supply (0x1C).
PCR 20119
OCP Fibre Channel tape drive and media changer configuration does not work.
PCR 20126
28/01 Unit attention presented to host when the I/E load port door is initially opened
instead of only when closed.
PCR 20151
Capacity on Demand (COD) should be disabled, all units set to full capacity.
PCR 20171
Source element address may become corrupted in a stacked system.
PCR 20193
Doors enable
default should be changed to
enabled
.
PCR 20212
The library shouldn’t clear tape alerts when only the Log Sense header is requested because
it prevents the host from seeing the actual state of the library.
Change
Request
Number
Service
Request
Number
Description