Document 81-81338-01 d01, june 2005 1 quantum px506 and px510 unpacking and installation instructions introduction 3 selecting an installation location 4 rack space requirements.........................................................................................5 environmental conditions...........
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 2.
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 introduction 3 introduction 0 this document explains how to unpack the quantum px506 and px510 libraries and install them in a standard 19 in. Rack. Once the library is unpacked and installed, set up t...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 4 selecting an installation location figure 2 quantum px510 library selecting an installation location 0 when choosing an installation site for the px506 and px510, consider the following requirements:...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 selecting an installation location 5 rack space requirements 0 figure 3 shows the minimum rack space required by both the px506 and px510. • depth - 31 in (76.2 cm) • width - 19 in (48.3 cm) • height: ...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 6 selecting an installation location figure 3 rack space requirements environmental conditions 0 the installation site must have the following environmental conditions: • humidity: 20%-80% non-condensi...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 preparing for the installation 7 • service clearance - 15 in (38 cm) in the front of the library and 12 in (30 cm) in the back of the library these environmental conditions apply when the px506 and px5...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 8 unpacking the library • do not place static-sensitive parts on a metal surface. Place them inside their protective shipping bag or on an antistatic mat. • avoid touching connectors and other componen...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 unpacking the library 9 figure 4 unpacking the libraries (px506) metal bands front bezel accessories kit lift point cover pallet metal bands.
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 10 unpacking the library figure 5 unpacking the libraries (px510) metal bands front bezel accessories kit lift point sleeve pallet metal bands lid.
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 removing the remaining packing materials 11 removing the remaining packing materials 0 now that you have removed the library chassis from its shipping carton, remove the remaining packing materials fro...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 12 removing the remaining packing materials figure 6 opening the right and left magazine access doors 4 insert the wooden dowel that is included in the library accessory kit into the magazine release h...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 removing the remaining packing materials 13 figure 7 removing the magazines magazine release (engaged) magazine release magazine release hole right magazine px506 shown.
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 14 removing the remaining packing materials 5 to remove the robotics restraints (see figure 8 ): a disconnect the two velcro straps securing the robotics restraints to the library chassis. B pull the s...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 15 e close the front doors. 6 remove the tape drive cover plates by loosening the captive screws securing the plate to the library chassis with a flat blade screwdriver (see figu...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 16 installing the library it is important to the library installation to locate the hole pattern in the rack rails (see figure 11 ). The library must be installed at the beginning of the hole pattern. ...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 17 figure 10 px506 rail hole patterns and mounting positions )urqwsdqho vfuhzv 8 r i udf n v s dfh 8 lq pp %dfnsdqho vfu hzv %dfnsdqho vfuhzv )urqwsdqho vfuhzv )urqwsdqho vfuhzv ...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 18 installing the library figure 11 px510 rail hole pattern and mounting positions )u rqwsdqho vfuhzv 8 r i ud fn v s df h lqp p lqp p lqpp lqp p lqp p 7rsriudfn lqpp lqpp +rohsdwwhuq 8 lq pp %dfnsdqho...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 19 installing the library 0 installing the px506 and px510 libraries consists of the following steps : • installing the rack mount shelves • installing the library chassis • cabl...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 20 installing the library installing the rack mount shelves 0 1 assemble the rack mount shelves by (see figure 13 ): a loosely attach the adjustable shelves (right and left) with 4 m5 x 10 allen screws...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 21 figure 12 rail adapter orientation figure 13 assembling the rack mount shelves 2 install the left and right rack mount shelves into the rack (the rack mount shelves adjust 27 ...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 22 installing the library figure 14 installing the rack mount shelves 3 once the rack mount shelves are secured to the rack, tighten the allen screws securing the adjustable shelves together. Installin...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 23 figure 15 removing the power supplies 2 the back mounting brackets are lettered (a through i) so the correct mounting position is easily determined. The mounting positions dif...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 24 installing the library table 3 back mounting bracket orientation once the location is determined, attach the back brackets to each side of the library with four m5 x 8 allen screws (see figure 16 fo...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 25 figure 16 back mounting brackets (px506) figure 17 back mounting brackets (px510) 3 install the library into the rack as shown and secure with eight phillips screws for the px...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 26 installing the library figure 18 installing the library into the rack figure 19 installing the library into the rack fro nt o f ra ck phillips screws fro nt o f ra ck phillips screws.
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 27 4 secure the back of the library to the rack with two mounting clamps and and two allen screws on each clamp. The mounting clamps are oriented differently depending on the dep...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 28 installing the library figure 21 removing the tape drive cover plates b insert the tape drive into the drive bay slowly until the connectors are seated. Refer to figure 22 and figure 23 for drive ba...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 29 figure 23 px510 tape drive numbering c tighten the tape drive thumbscrews using a flat blade screwdriver. D repeat these steps to install another tape drive in a different loc...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 30 installing the library • px510 cabling configuration (scsi) figure 24 px506 cabling configuration (scsi) note: quantum ships sufficient scsi cables and terminators with the libraries to set up two-d...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 31 figure 25 px510 cabling configuration (scsi) 2 connect one end of an ac power cable to each installed power supply and to a wall outlet. Host computer host computer host compu...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 32 installing the library loading the tape cartridges 0 before operating the library, load the appropriate tape cartridges (lto and/ or sdlt) into the library starting with the left-hand magazines (ref...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing the library 33 setting the library options 0 to set the library options: 1 press setup from the home screen. The ocp displays the setup screen (see figure 27 ): figure 27 setup screen 2 from...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 34 installing the library table 4 setting up the cabinet setting the date and time 0 to set the date and time: 1 from the setup screen, use the up and down arrows to highlight date and time and press e...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing additional libraries 35 setting network information 0 to view or edit the network information: 1 from the setup screen, use the up and down arrows to highlight network and press enter . The ...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 36 installing additional libraries • installing the libraries • configuring the libraries in a multiple stack removing the flexlink covers 0 the flexlink covers must be removed prior to library install...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing additional libraries 37 figure 32 removing the pass-through cover plates the cover plates are removed. Infrared transmitter/ receiver screws cover plate cover plate screws infrared transmitt...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 38 installing additional libraries installing the alignment hardware 0 the alignment hardware is installed on the top and bottom of the libraries in a multiple stack to allow the flexlink bays to align...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 installing additional libraries 39 installing the libraries 0 refer to installing the library on page 15 for information on installing the library chassis into the rack. The libraries must be stacked w...
Quantum px506 and px510 unpacking and installation instructions document 81-81338-01 d01 june 2005 40 installing additional libraries.
