RAD B- 2.5 User manual - page 13
B-RAD 2.5 USER MANUAL
New World Technologies Inc.
Page • 11
V2014.07.03
3.1.2 Reaction Arm Height
Ensure the height of the socket is even with the height of the Reaction Arm as seen below
in Figure 3.1.2-1. The height of the socket cannot be shorter or higher than the height of
the Reaction Arm as seen below in Figure 3.1.2-2.
CORRECT:
The Reaction Arm and socket are even height.
Figure 3.1.2-1: Correct Height
INCORRECT:
The leg of the Reaction Arm is too short on the left side, and too long on the
right side.
Figure 3.1.2-2: Incorrect Height
IMPROPER REACTION WILL VOID WARRANTY AND CAN CAUSE PREMATURE TOOL
FAILURE.
3.1.3 Reaction Arm Foot
Ensure the foot of the Reaction Arm aligns with the length of the nut as seen in Figure
3.1.3-1. The length of the foot cannot be shorter or longer than the nut as seen in Figure
3.1.3-2.
CORRECT:
The foot of the Reaction Arm aligns with the length of the nut.
Figure 3.1.3-1: Correct Length