RAD B- 2.5 User manual - page 9
B-RAD 2.5 USER MANUAL
New World Technologies Inc.
Page • 7
V2014.07.03
Figure 2.1-1: B-RAD
2.1.1 Trigger Lock
The Trigger Lock is useful while transporting or storing the B-RAD. The Trigger Lock
disables the use of the On/Off Trigger, therefore disabling the tool. It is suggested that
while the B-RAD is not in use, the Trigger Lock should be enabled.
To enable the Trigger Lock:
1. Slide the Forward/Reverse Switch to the Centre Position (neither fully to the right
nor fully to the left).
Note: The On/Off Trigger cannot be depressed.
To disable the Trigger Lock:
1. Slide the Forward/Reverse Switch to the Forward Position or the Reverse Position.
Note: The On/Off Trigger can be depressed.
2.2 Torque Chart
The Torque Chart displays the Settings and the corresponding Torque. An example of a
Torque Chart is shown in Table 2.2-1.
B-RAD 700-2 Torque Chart FtLbs
Setting
Torque
1
0
2
234
3
319
4
401
5
503
6
596
7
681
8
818
Cal. Date: 01/01/2010
Serial # B0000
Table 2.2-1: Torque Chart
Note: Do not refer to Table 2.2-1 to determine the Setting for the B-RAD. Each B-RAD is different and
has a different Torque Chart. Only use the Torque Chart attached to the B-RAD.
3
4
5
2
1
6
7