RAD B- 2.5 User manual - page 15
B-RAD 2.5 USER MANUAL
New World Technologies Inc.
Page • 13
V2014.07.03
Figure 3.2-1: Setting Dial
Figure 3.2-2: High(2)/Low(1) Switch
4. Place the B-RAD on the joint system.
5. Ensure the Forward/Reverse Switch is in the Forward Position.
6. Press and hold the On/Off Trigger.
Note: To stop the Torque Cycle at any time, release the On/Off Trigger.
7. When the B-RAD reaches the Torque, the clutch mechanism will slip. Immediately
release the On/Off Trigger.
CAUTION!
Damage will occur if the clutch is allowed to slip for extended periods of time.
4.0 Error
Important!
Disassembling or attempting repair will void warranty.
If breakdown, malfunction, or error occurs, contact New World Technologies Inc. Technical
Support (refer to Section 5.0 – Contact Us).