Radenso Pro Series User Manual - page 6
Page 5
Control buttons on top and side of unit:
Le
Le
Le
Left button
ft button
ft button
ft button MENU / ON
MENU / ON
MENU / ON
MENU / ON----OFF
OFF
OFF
OFF
Short press: You will enter into setup menu. During an alert pressing the button will mute the volume.
The next alarm will be reported again in the standard volume.
Long press: Turn ON / OFF Radenso Pro.
Middle button BRIGHTNESS
Middle button BRIGHTNESS
Middle button BRIGHTNESS
Middle button BRIGHTNESS /
/
/
/ ALERT SUPPRESSION
ALERT SUPPRESSION
ALERT SUPPRESSION
ALERT SUPPRESSION
Short press: You can change the brightness of the display - Bright -> Dim -> Smart Dark -> Full Dark.
Bright:
Brightest display setting
Dim:
Slightly dimmed display
Smart Dark:
Display is deactivated but will come on with Text warning during an alert
Full Dark:
Display is completely deactivated. Only voice and tone alerts are active
Long Press: Holding the button during an obvious false alert will lockout the location in the future. The
signal will no longer be reported and the alarm suppressed when passing the marked
location again. You can re-activate the location again by holding the button when
approaching the marked location.
Right button
Right button
Right button
Right button SENSITIVITY
SENSITIVITY
SENSITIVITY
SENSITIVITY /
/
/
/ ADD YOUR
ADD YOUR
ADD YOUR
ADD YOUR OWN GPS POINT
OWN GPS POINT
OWN GPS POINT
OWN GPS POINT
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the
sensitivity of X / K / Ka bands can be reduced according to user preference.
Long Press: Add your own POI GPS point for future alarms.
+ /
+ /
+ /
+ / ----Buttons on the right side
Buttons on the right side
Buttons on the right side
Buttons on the right side
Short press: Changing alert volume of Radenso Pro or change program options while in Menu Mode