Raleigh Bosch Cruise User Manual - 10   Cleaning

20  

IV User Manual Pedelec with front motor

›

Undo the two hexagon socket screws on the left 

behind the fork using a 5 mm Allen key. You need 

to turn them anticlockwise.

Apply a max. tightening torque of 9.5 Nm to these 

screws when putting the wheel back on 

1 + 2  Hexagon socket screws on the fork

1

2

›

You can now start removing the front wheel.

›

Once you have put the front wheel back on, repeat 

these steps in reverse. This ensures that your Pe-

delec will work properly.

For a detailed description on how to remove and install 

the front wheel, refer to the General User Manual.

The General User Manual also contains all other bicycle-

related information on your Pedelec.

10   Cleaning

Remove the battery before you clean your Pedelec. 

We recommend you clean your Pedelec with a damp cloth, 

a sponge or a brush. You can obtain suitable cleaning 

agents and additional information from your specialist 

cycle shop. 

Make sure when cleaning that water does not enter the 

battery. Although the electrical components are sealed, 

it is not advisable to clean the bike by spraying it with a 

hose or a high-pressure cleaner. This could damage your 

bike. 

When wiping down the battery, be careful not to touch and 

connect the contacts on the underside. This could cause 

the battery to switch off.