Raleigh Bosch Cruise User Manual - 5  Control Panel

VII User Manual | Pedelec Groove  

  9

5  Control panel

1

2

1  Button for power assist level 

2  On/Off switch

3   Power-assist mode display

4   Battery charge state indicator

3

4

The control panel on the handlebar has two or three but-

tons (depending on the model) and two rows of LED indi-

cators. The button used to control the level of assistance 

is located on the left-hand side of the control panel.

To the right at the bottom you can see the LED display bar 

which indicates the level of assistance which has been 

activated and the current battery charge state.

The 

POWER

 button is located above the LEDs. 

Press this button to switch the control panel on and off.

On/Off button

If the model features pushing assistance, the switch for 

this will be on the underside of the control panel.

Button for pushing assistance 

5.1  On/Off button

Press the 

POWER

 button to switch the control panel on 

and off.

After it has been switched on, the system is always in the 

medium power-assist mode 

SPORT

.

5.2   Switches for power-assist level

You can specify the power assist level via the Mode  

button. 

Buttons for power assist level

Each time you press the Mode button the power assist 

changes by one level. 

Each time you press the Mode button, the assistance 

changes by one level from 

ECO

 through to the highest level 

POWER

.  

If you require less assistance, press the Mode button until 

the level of assistance moves from the highest back to the 

lowest level.